News
Hot Air Optical Lens Glasses Frame Warmer Heater Digital & Ceramic Heating 220V
Hot Air Optical Lens Glasses Frame Warmer Heater Digital & Ceramic Heating 220V
June 04, 2026
Specifications:
Name: Frame heater
Model: CP-19AT
Voltage: 220v/110v
Frequency: 50Hz/60Hz
Power: 550w
Wind speed: 1.8M/s
Temperature value: 80-160 degrees
Working noise: <70db(A)
Application: heating of temples, heating of frames
Packing size: 22.5*21.5*16cm
Weight: 1.6kg
Precautions:
1. Do not heat for too long at one time, shorten the use to extend its life;
2. When the voltage is unstable, please do not use the machine;
3. Do not drip water droplets into the inside, otherwise it will cause circuit failure
and cause the motor to burn;
4. Please check if there is any foreign matter in the air outlet before use;
5. The heater should be placed on a flat table, and the air inlet below should not
be blocked.

